Follow Us:

Flotation Machine

Flotation process is usually a continuous process by a few tanks, dozens of tank flotation machine connections, including roughing, scavenging, concentration operations. Machines function normally and achieve the required aeration rate. Motor drives impeller rotating through belt and pulley. The machine can inhale enough air mixed with slurry as well as stir the mixture of pulp and pharmaceutical.

We're here to help:

Easy ways to get the answers you need.

0086-21-58386189, 58386176
0086-21-58386211

    Flotation Machine Advantages

  • It has a smaller diameter of impeller and lower power consumption.
  • An air distributor is equipped in the tank, air is evenly dispersed.
  • The impeller works as a centrifugal pump, so as to make the solid particles suspending.
  • The tank is made as U type, reducing sand settlement to the least.
  • Due to reasonable design of the impeller structure and the impeller space, impeller wearing is even, reagents consumption is less and save the running cost.
  • It can run with load, the structure is simple and have easily maintenance.
  • With slurry level control system and make it operated easily.
Model Effective capacity(m3) capacity Diameter of impeller Revolution of impeller Motor power KW Weight of 4 cell cell
for agitating for scraper
XJ1 0.13 0.05~0.6 200 600 Y90L-4 1.5 0.55
XJ2 0.23 0.12~0.28 250 504 Y100L2-4 1.5 0.55
XJ3 0.35 0.18~0.4 300 483 Y112L-4 1.5 0.6
XJ6 0.62 0.3~0.9 350 400 Y132S-6 3 1.1
XJ11 1.1 0.6~1.6 500 330 Y132M2-6 5.5 1.1
XJ28 2.8 1.5~3.5 600 280 Y160L-6 11 1.1
XJ58 5.8 5~7 750 240 Y200L2-6 22 2.2

It is widely used for copper, lead, zinc, nickel, molybdenum, gold and other non-ferrous metals, ferrous metals and non-metallic minerals roughing, concentration and flotation operations. Especially for fine disseminated and complex composition ore, using this series flotation machine can get better separation effect. Model XCF and KYF are enforced aeration flotation machine, and widely used for nonferrous metals, ferrous metal, and non-metallic minerals. These two always work together; have similar structures features and almost the same overall dimension size.

Flotation Machine Working Principle

The flotation cell is constructed in a form of a cylindrical tank with a flat bottom. The upper part of the cell contains froth product runners in a radial arrangement connected to an outer cumulative runner. The cell and its components having contact with pulp are protected against corrosion by thick epoxy – acrylic coating. To ensure a long-life of the flotation machine, side surfaces are covered with polymeric or ceramic coating and the bottom as well as control boxes with ceramic lining. The feed and waste cells are connected to the flotation cell by welding. Control of the level in individual cascades is performed by the valve system, located on the edge of the last cell in the cascade. The last cell in the whole flotation flow is equipped with a waste box with the same valve system as is used for the control of level in the individual cascades.

Services

Supply the most current design and technical expertise;Supply parts sales and training service far beyond the initial sale;Your profits with quality parts and expert service.

Related Products:
Inquiry

Inquiry

Please fill in your name and your message and do not forget mail and/or phone if you like to be contacted. Please note that you do not need to have a mail programme to use this function.